Laser Cladding

Laser cladding

Laser cladding

Cladding is a welding procedure that puts weld metal on the surface of the work, as opposed to joining two pieces of material. Generally, this is used for corrosion resistance or wear resistance and frequently a different material is used for the clad than for the base metal.  In hot wire welding, the power supply controls the heat of the filler wire prior to its introduction into the weld puddle. Arc energy that would usually go into melting the wire provides more penetration, while heating of the wire almost to the melting point by a separate power supply increases deposition beyond that possible with standard cold wire TIG. In cladding applications where the part is rotated, the hot wire solution can result in weld deposition that approaches MIG speed, but with TIG quality. Laser cladding is realized either as wire (laser hot wire cladding) or powder cladding. The laser beam creates a molten pool at the workpiece surface, to which is simultaneously added the laser coating material (wire or powder) molten by the laser. The exposure time is short, which creates only a short delay as the cooling is quick. The result is a layer that is connected with the basic material metallurgically. It is tougher than those coatings created by thermal spraying, and compared to hard chromium plating, for example, it is harmless to health, too. Advantages: 1. low exposure time and depth of the laser 2. metallurgical connection of layer and basic material 3. layers are more resistant than thermal spray coatings 4. high surface quality and low warpage, with almost no post-processing necessary 5. short laser cladding process period, high-energy efficiency
Laser cladding on plate

Laser cladding on plate